Pac-Mac® RLX Series Refuse Truck

World class manufacturing and cutting-edge technology merge to create a superior product: The Pac-Mac® RLX Series. This unit is available in 18, 20, 25 cubic yards with a compaction rate of 1,000+ lbs/yd. Our rear loader truck is engineered using the most advanced computer modeling systems, proving that Pac-Mac is committed to providing the highest quality products in the solid waste industry.

Contact Us: (800) 248-7590
Request a Quote
OEM Info

Ready To Sell Inventory

Pac-Mac RLJ20 – 20 yd Rear Loader 2024 Western Star 47X – VIN UX5159

Pac Mac RLX20 Rear Loader Western Star 47X – VIN UX7257

Pac Mac RLX 20 yd Rear Loader Western Star 47X – VIN UX7258

One piece flat floor
Curved shell body
Fast cycle time
Meets or exceeds ANSI standards
Wide open accessibility for cleaning and maintenance
Automatic latches and integrated tailgate props
The industry’s highest standard for hydraulic cleanliness
LED lighting, weatherproof connections and braided loom
Dual Amber oval rear strobes
Heat-treated pins and replaceable bushings throughout
Large access door with safety interlock
Emergency stop on curb side
Driver alert buttons on both sides
Sectional valves

Single or dual cart tippers
Reeving system: 15K cylinder
Kick bar and container latches
Front-mounted pump
Amber or clear beacon rear strobes (single or dual)
Amber oval flush mount strobes (front and/or rear)
Smart light strobe system (may be combined with amber ovals)
Rear vision camera
Work lights over hopper and tailgate sides
Frame mounted water cooler
Frame mounted tool box
Emergency stop on street side
Pressure gauge
Limb guard

Model

Capacity

18 yd³

Hopper capacity

3.61 yd³

Body weight (body shell only)

4,779 lb

Body weight (complete unit, less options)

12,700 lb

Hopper inside width

80″

Body Construction Specifications

Sidewalls (curved shell)

10 ga 80,000 PSI

Floor (single sheet, flat)

3/16″ high tensile steel

Roof (curved shell)

10 ga 80,000 PSI

Ejection panel face

10 ga 80,000 PSI

Hopper

1/4″ 100,000 PSI (T-1)

Packer panel face

1/4″ 100,000 PSI (T-1)

Slide panel face

3/16″ T-1 steel

Hopper sides

3/16″ T-1 steel (lower tailgate);10 ga 80 ksi steel (upper tailgate)

Hydraulic System

Cylinders

Ejector: (1) 2-stage 5.5″ bore
Tailgate: (2) 3″ bore; 1.75″ rod; 38″ stroke
Slide: (2) 5″ bore; 4″ rod; 30″ stroke
Packer: (2) 4.5″ bore; 3.5″ rod; 24.38″ stroke

Valves

Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool

Operating pressure in PSI

2,500

Maximum operating pressure

2,750

Gallons per minute (GPM)

35-38 GPM

Reservoir

50 gal.

Packing cycle time

Complete: 17-19 sec
Reload 3 sec

Compaction rate in lb/yd

900+

Model

Capacity

20 yd³

Hopper capacity

3.61 yd³

Body weight (body shell only)

5,118 lb

Body weight (complete unit, less options)

13,000 lb

Hopper inside width

80″

Body Construction Specifications

Sidewalls (curved shell)

10 ga 80,000 PSI

Floor (single sheet, flat)

3/16″ high tensile steel

Roof (curved shell)

10 ga 80,000 PSI

Ejection panel face

10 ga 80,000 PSI

Hopper

1/4″ 100,000 PSI (T-1)

Packer panel face

1/4″ 100,000 PSI (T-1)

Slide panel face

3/16″ T-1 steel

Hopper sides

3/16″ T-1 steel (lower tailgate);10 ga 80 ksi steel (upper tailgate)

Hydraulic System

Cylinders

Ejector: (1) 2-stage 5.5″ bore
Tailgate: (2) 3″ bore; 1.75″ rod; 38″ stroke
Slide: (2) 5″ bore; 4″ rod; 30″ stroke
Packer: (2) 4.5″ bore; 3.5″ rod; 24.38″ stroke

Valves

Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool

Operating pressure in PSI

2,500

Maximum operating pressure

2,750

Gallons per minute (GPM)

35-38 GPM

Reservoir

50 gal.

Packing cycle time

Complete: 17-19 sec
Reload 3 sec

Compaction rate in lb/yd

900+

Model

Capacity

20 yd³

Hopper capacity

3.61 yd³

Body weight (body shell only)

5,118 lb

Body weight (complete unit, less options)

13,000 lb

Hopper inside width

80″

Body Construction Specifications

Sidewalls (curved shell)

10 ga 80,000 PSI

Floor (single sheet, flat)

3/16″ high tensile steel

Roof (curved shell)

10 ga 80,000 PSI

Ejection panel face

10 ga 80,000 PSI

Hopper

1/4″ 100,000 PSI (T-1)

Packer panel face

1/4″ 100,000 PSI (T-1)

Slide panel face

3/16″ T-1 steel

Hopper sides

3/16″ T-1 steel (lower tailgate);10 ga 80 ksi steel (upper tailgate)

Hydraulic System

Cylinders

Ejector: (1) 2-stage 5.5″ bore
Tailgate: (2) 3″ bore; 1.75″ rod; 38″ stroke
Slide: (2) 5.5″ bore; 4.5″ rod; 29″ stroke
Packer: (2) 4.5″ bore; 3.5″ rod; 24.38″ stroke

Valves

Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool

Operating pressure in PSI

2,500

Maximum operating pressure

2,750

Gallons per minute (GPM)

35-38 GPM

Reservoir

50 gal.

Packing cycle time

Complete: 24 sec
Reload 4 sec

Compaction rate in lb/yd

1000+

Model

Capacity

25 yd³

Hopper capacity

3.61 yd³

Body weight (body shell only)

5,885 lb

Body weight (complete unit, less options)

14,000 lb

Hopper inside width

80″

Body Construction Specifications

Sidewalls (curved shell)

10 ga 80,000 PSI

Floor (single sheet, flat)

3/16″ high tensile steel

Roof (curved shell)

10 ga 80,000 PSI

Ejection panel face

10 ga 80,000 PSI

Hopper

1/4″ 100,000 PSI (T-1)

Packer panel face

1/4″ 100,000 PSI (T-1)

Slide panel face

3/16″ T-1 steel

Hopper sides

3/16″ T-1 steel (lower tailgate);10 ga 80 ksi steel (upper tailgate)

Hydraulic System

Cylinders

Ejector: (1) 3-stage 6.5″ bore
Tailgate: (2) 3″ bore; 1.75″ rod; 38″ stroke
Slide: (2) 5″ bore; 4″ rod; 30″ stroke
Packer: (2) 4.5″ bore;

Valves

Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool

Operating pressure in PSI

2,500

Maximum operating pressure

2,750

Gallons per minute (GPM)

35-38 GPM

Reservoir

50 gal.

Packing cycle time

Complete: 17-19 sec
Reload 3 sec

Compaction rate in lb/yd

900+

Model

Capacity

25 yd³

Hopper capacity

3.61 yd³

Body weight (body shell only)

5,885 lb

Body weight (complete unit, less options)

14,000 lb

Hopper inside width

80″

Body Construction Specifications

Sidewalls (curved shell)

10 ga 80,000 PSI

Floor (single sheet, flat)

3/16″ high tensile steel

Roof (curved shell)

10 ga 80,000 PSI

Ejection panel face

10 ga 80,000 PSI

Hopper

1/4″ 100,000 PSI (T-1)

Packer panel face

1/4″ 100,000 PSI (T-1)

Slide panel face

3/16″ T-1 steel

Hopper sides

3/16″ T-1 steel (lower tailgate);10 ga 80 ksi steel (upper tailgate)

Hydraulic System

Cylinders

Ejector: (1) 3-stage 6.5″ bore
Tailgate: (2) 3″ bore; 1.75″ rod; 38″ stroke
Slide: (2) 5.5″ bore; 4″ rod; 29″ stroke
Packer: (2) 5″ bore; 3.5″ rod; 24.38″ stroke

Valves

Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool

Operating pressure in PSI

2,500

Maximum operating pressure

2,750

Gallons per minute (GPM)

35-38 GPM

Reservoir

50 gal.

Packing cycle time

Complete: 24 sec
Reload 4 sec

Compaction rate in lb/yd

1000+

All material on this page referring to Pac-Mac® RLX Series Refuse Truck including text, images, logos and pdfs, are owned by Pac-Mac, either through copyright or trademark, unless otherwise indicated.

Municipal Equipment, Inc. is an authorized Pac-Mac reseller.